 |
Choose from above-floor or recessed models. |
|
 |
Easy Drive On-Drive Off Operation
Fixed Plate Model Only 100mm High.
Adjustable Length Plate Model Only 105mm High. |
|
 |
Smooth Controlled Lowering
The synchro cylinder system incorporates a
"forced lowering" system that ensures
smooth lowering even when unloaded. |
|
 |
Applicable to A Wide Range Of Vehicles
The lift capacity of 3,000kg ensures that most
passenger vehicles are accommodated for.
(Note: This lift is not suitable for commercial
or recreational vehicles) |
|
 |
Supporter Blocks are easily Positioned
Light weight design for operator comfort. |
|
 |
Your Choice of Installation System
The lift may be installed on the floor surface
or recessed into a shallow pit. |
|
 |
Simple Installation and Easy to Transport
Each side of the lift is an independent
component as a result of the Bishamon
synchronizing system. |
|
|
|
 |
| Fixed Drive On Plate |
Adjustable Length Drive On Plate |
 |
 |
| Fixed Drive On Plate |
Adjustment 1507～2101
for surface mounted model
Adjustment 1532～2162
for pit installed model |
 |
 |
Surface Mounted Model
(Adjustable Plate Length) |
Pit Installed Model
(Adjustable Plate Length) |
|
|
|
|
Aluminum Drive-In Ramp (4pcs/set) for
low profile vehicle. |
Ramp Storing Cart
(good for Sill Support and tools etc.) |
 |
 |
 |
 |
Sill Support Block
Optical High Block (115mm high) |
Standard Block (70mm high) |
 |
 |
|
 |
Rugged and Durable Construction
Bishamon's patented scissor mechanism ensures the
sturdiness of this unit. |
|
 |
Highly Reliable Synchronizing System
Bishamon's Patented hydraulic synchro cylinder ensures
reliable lift synchronization. |
|
 |
Automatic Correction of Unbalanced Lift
If unbalanced, the lift will correct itself at both the top and
bottom. |
|
 |
Shock Absorbing Design
The impact shock at the bottom when lowering is absorbed by
the Bishamon system. |
|
 |
Low Voltage Control
The control system voltage is only 24V to ensure operator
safety. |
|
 |
Safety Devices
Standard safety devices incorporated include Lowering
Stoppers, Hydraulically Shut-Off Valves, overload Protection,
Air Supply Safety Switch. |
|
|
 |
Hydraulic Unit |
Synchro Cylinder |
|
 |
|
| Model No. |
SCL3000A |
SCL3000AP |
| installation |
Surface Mounted |
Pit Installed |
| Supporter |
1750Adjustable Length Drive On Plate |
Adjustable Length Drive On Plate |
| Capacity |
3,000kg |
3,000kg |
| Vertical Travel |
1,800mm |
1,800mm |
| Control |
Push Button (24V) |
Push Button (24V) |
| Power |
3PH/200V/380/415/
440V/50HZ/60HZ |
3PH/200V/380/415/
440V/50HZ/60HZ |
| Drive |
Electro Hydraulic |
Electro Hydraulic |
| Motor |
2.2KW4P/5Min.Rating |
2.2KW4P/5Min.Rating |
| Rising Speed |
61sec.(50HZ), 51sec.(60HZ) |
61sec.(50HZ), 51sec.(60HZ) |
| Lowering Speed |
25sec.(3,000kg load) |
25sec.(3,000kg load) |
| Distance of Lift Center |
1,400mm |
1,400mm |
| Applicable Vehicle |
Passenger Vehicle |
Passenger Vehicle |
| Weight |
Lift Unit 850kg, Hyd. Unit 200kg |
Lift Unit 820kg, Hyd. Unit 200kg |
| Oil |
ISO VG32 |
ISO VG32 |
| Oil Volume |
15 Liters |
15 Liters |
| Air Pressure |
0.69Å`0.97MPa (7Å`9.9kgf/cm2) |
0.69Å`0.97MPa (7Å`9.9kgf/cm2) |
|
|
