Multi Lift


	Introducing the first X-link lift to feature a flat mechanism. The flat base, even when the lift is in use, provides a dramatic increase in work efficiency.

When raising lift

When lowering lift

♦	Uses a flat kit with a revolutionary new design created especially for multi-lifts. A flat surface at the base of the lift, both when the lift is raised and when it's at its lowest position, provides dramatic improvements in workability and safety.
♦	A special height-holding mechanism activates when the flat kit is at its maximum height to prevent it from being accidentally lowered during work.

Model	Capacity (kg)		Drive-on length (mm)		Comments	Standard features	Options
Model	Lower lift	Upper lift	Lower lift	Upper lift	Comments	Standard features	Options
MUS30HUF	3000	3000	4000	1500 (with arms)	Alignment model	Upper lift Compatible with wheelbases up to 3,100 mm Side seal blocks Swing board bearers For alignment use Turning feature Attachments	NRJ20 Drive-on extension kit Extended drive-on width model
MUS30GUF	3000	-	4000	-	Alignment model	Compatible with wheelbases up to 3,100 mm For alignment use Turning feature	NRJ20 Drive-on extension kit Extended drive-on width model
MUS40UF	4000	3000	4000	1500 (with arms)	-	Upper lift Compatible with wheelbases up to 3,100 mm Side seal blocks Swing board bearers Attachments	NRJ20 Drive-on extension kit Extended drive-on width model
MUS40EUF	4000	-	4000	-	-	Compatible with wheelbases up to 3,100 mm	NRJ20 Drive-on extension kit Extended drive-on width model

The MUS30 Series enables high-precision wheel alignment measurement with a leveling precision of 4 mm along the wheelbase and just 2 mm in the tread direction. The series is fully compatible with today's popular optical alignment testers.

♦	A proven turning radius gage and slip plates guarantee high-precision wheel alignment measurement.
♦	At the push of a button, the lift automatically moves to the alignment measurement height and stops.
♦	Alignment measurement range	W/B 2,000 to 3,100mm T/R 1,200 to 1,550mm


Turning radius gage	Slip plates

Model	Capacity (kg)		Drive-on length (mm)		Standard features	Options
Model	Lower lift	Upper lift	Lower lift	Upper lift	Standard features	Options
MUS30HU	3000	3000	4000	1500 (with arms)	Upper lift Side seal blocks Swing board bearers Attachments	NRJ20 Drive-on extension kit Extended drive-on width model
MUS30GU	3000	-	4000	-		NRJ20 Drive-on extension kit Extended drive-on width model

The MUS40 is compatible with a wide range of vehicle types-up to a wheelbase of 3,300 mm and a weight of 4,000 kg. Acceptable for use with vehicles ranging from light cars to microbuses, it also features an optional drive-on length extension kit.

♦	Newly designed swing boards make it easy to position the arms at the vehicle's lift points for safe and reliable operation.
♦	Swing boards facilitate easy lifting of even vehicles with long wheelbases.


Swing boards	Swing boards

Model	Capacity (kg)		Drive-on length (mm)		Standard features	Options
Model	Lower lift	Upper lift	Lower lift	Upper lift	Standard features	Options
MUS40U	4000	3000	4000	1500 (with arms)	Upper lift Side seal blocks Swing board bearers Built-in unit Attachments	NRJ20 Drive-on extension kit Extended drive-on width model
MUS40EU	4000	-	4000	-	Built-in unit	NRJ20 Drive-on extension kit Extended drive-on width model
MUS40S	4000	3000	4000	1500 (with arms)	Upper lift Can be used at gas stations Side seal blocks Swing board bearers Attachments	NRJ20 Drive-on extension kit Extended drive-on width model

In above-floor settings, the MUL30 features a minimum clearance of 168 mm and is ideal for locations where in-ground installation is not an option. In-ground models can be installed with a pit depth of just 200 mm.

♦	With a minimum floor clearance of just 168 mm, the MUL30 is ideal for use in locations where in-ground installation is impossible, such as workplaces located on the second floor or higher.
♦	All models feature separate hydraulic units and can be installed in gas stations.
♦	Alignment-capable models are also available.
	Alignment measurement range	W/B 2,000 to 3,100mm T/R 1,200 to 1,550mm


Min. clearance of 168 mm	Separate hydraulic unit

Model	Capacity (kg)		Drive-on length (mm)		Comments	Standard features	Options
Model	Lower lift	Upper lift	Lower lift	Upper lift	Comments	Standard features	Options
MUL30(P)	3000	2000	4000	1450		Upper lift Side seal blocks	NRJ20 Remote control switch
MUL30E(P)	3000	-	4000	-			NRJ20 Remote control switch
MUL30H(P)	3000	2000	4000	1450	Alignment model	Upper lift Side seal blocks For alignment use Turning feature	NRJ20 Remote control switch
MUL30G(P)	3000	-	4000	-	Alignment model	For alignment use Turning feature	NRJ20 Remote control switch
(P) indicates in-ground models.

The drive-on width can be widened to increase work efficiency by making it easier to load large vehicles.

Bishamon's lifting beam is ideal for working on passenger cars, microbuses, and 4(4 trucks when you want to allow the vehicle's wheels to turn freely while on the lift. The lifting beam is designed for maximum loading width when used with 3-stage sliding bearers.


Lifting beam

Remote control switch (Deluxe)	Remote control switch (Standard)

Lift vehicles with wheelbases up to 3,800 mm with the drive-on extension kit. ∗Installation of models with the optional extension kit differs from the standard pit installation.

Choose from a deluxe switch that allows full lift operation and a standard switch that offers lifting and lowering functionality only. DANGER: Avoid operating the lift while underneath the vehicle.